Significant figures Totally Explained

Everything about Significant Digit totally explained

The significant figures (also called significant digits and abbreviated sig figs) of a number are those digits that carry meaning contributing to its accuracy. Generally this includes all digits except:

leading and trailing zeros where they serve merely as placeholders to indicate the scale of the number
spurious digits introduced, for example, by calculations carried out to greater accuracy than that of the original data, or measurements reported to a greater precision than the equipment supports.

The concept of significant figures is often used in connection with rounding. Rounding to n significant figures is a more general-purpose technique than rounding to n decimal places, since it handles numbers of different scales in a uniform way. Computer representations of floating point numbers typically use a form of rounding to significant figures, but with binary numbers.
The term "significant figures" can also refer to a crude form of error representation based around significant figure rounding; for this use, see Significance arithmetic.

Identifying significant digits

The rules for identifying significant digits when writing or interpreting numbers are as follows:

All non-zero digits are considered significant. Example: 123.45 has five significant figures: 1, 2, 3, 4 and 5.

Zeros appearing anywhere between two non-zero digits are significant. Example: 101.12 has five significant figures: 1, 0, 1, 1 and 2.

Leading zeros are not significant. For example, 0.00012 has two significant figures: 1 and 2.

Trailing zeros in a number containing a decimal point are significant. For example, 12.2300 has six significant figures: 1, 2, 2, 3, 0 and 0. The number 0.00122300 still has only six significant figures (the zeros before the 1 are not significant). In addition, 120.00 has five significant figures. This convention clarifies the precision of such numbers; for example, if a result accurate to four decimal places is given as 12.23 then it might be understood that only two decimal places of accuracy are available. Stating the result as 12.2300 makes clear that it's accurate to four decimal places.

The significance of trailing zeros in a number not containing a decimal point can be ambiguous. For example, it may not always be clear if a number like 1300 is accurate to the nearest unit (and just happens coincidentally to be an exact multiple of a hundred) or if it's only shown to the nearest hundred due to rounding or uncertainty. Various conventions exist to address this issue:
ť *A bar may be placed over the last significant digit; any trailing zeros following this are insignificant. For example,

13ar0

has three significant figures (and hence indicates that the number is accurate to the nearest ten).

ť *The last significant figure of a number may be underlined; for example, "20000" has two significant figures.

ť *A decimal point may be placed after the number; for example "100." indicates specifically that three significant figures are meant.

ť However, these conventions are not universally used, and it's often necessary to determine from context whether such trailing zeros are intended to be significant. If all else fails, the level of rounding can be specified explicitly. The abbreviation s.f. is sometimes used, for example "20 000 to 2 s.f." or "20 000 (2 sf)". Alternatively, the uncertainty can be stated separately and explicitly, as in 20 000 ± 1%, so that significant-figures rules don't apply.

A number with all zero digits (for example 0.000) has no significant digits, because the uncertainty is larger than the actual measurement.

Scientific notation

Generally, the same rules apply to numbers expressed in scientific notation. However, in the normalised form of that notation, placeholder leading and trailing digits don't occur, so all digits are significant. For example, 0.00012 (two significant figures) becomes 1.2×10⁻⁴, and 0.000122300 (six significant figures) becomes 1.22300×10⁻⁴. In particular, the potential ambiguity about the significance of trailing zeros is eliminated. For example, 1300 (four significant figures) is written as 1.300×10³, while 1300 (three significant figures) is written as 1.30×10³.

Rounding

To round to n significant figures:

Start with the leftmost non-zero digit (for example the '1' in 1 200, or the '2' in 0.0256).

Keep n digits. Replace the rest with zeros.

Round up by one if appropriate. For example, if rounding 0.039 to 1 significant figure, the result would be 0.04. There are several different rules for handling borderline cases — see rounding for more details.

Examples

Rounding to 2 significant figures:

12 300 becomes 12 000

13 stays as 13

0.00123 becomes 0.0012

0.1 becomes 0.10 (the trailing zero indicates that we're rounding to 2 significant figures).

0.02084 becomes 0.021

0.0125 becomes 0.012 in unbiased rounding, while it's 0.013 in biased.

19 800 becomes 20 000 (but see the notes above about trailing zeros)

Arithmetic

For multiplication and division, the result should have as many significant figures as the measured number with the smallest number of significant figures.
For addition and subtraction, the result must have the same number of decimal places as the least precise measurement.

Importance

Superfluous precision

If a sprinter is measured to have completed a 100 m race in 11.71 seconds, what is the sprinter's average speed? By dividing the distance by the time using a calculator, we get a speed of 8.53970965 m/s.
   The most straightforward way to indicate the precision of this result (or any result) is to state the uncertainty separately and explicitly, for example as 8.540±0.085 m/s or equivalently 8.540(85) m/s. This is particularly appropriate when the uncertainty itself is important and precisely known. In this case, it's safe and indeed advantageous to provide more digits than would be called for by the significant-figures rules.
   If the degree of precision in the answer isn't important, it's again safe to express trailing digits that are not known exactly, for example 8.5397 m/s.
   If, however, we're forced to apply significant-figures rules, expressing the result as 8.53970965 m/s would seem to imply that the speed is known to the nearest 10 nm/s or thereabouts, which would improperly overstate the precision of the measurement. Reporting the result using three significant figures (8.54 m/s) might be interpreted as implying that the speed is somewhere between 8.535 and 8.545 m/s. This again overstates the accuracy, but not nearly so badly. Reporting the result using two significant figures (8.5 m/s) would introduce considerable roundoff error and degrade the precision of the result.

Comprehension

Numbers are often rounded off to make them easier to read. It's easier for someone to compare (say) 18% to 36% than to compare 18.148% to 35.922%. Similarly, when reviewing a budget, a series of figures like:
Division A: $185 000 Division B: $ 45 000 Division C: $ 67 000 is easier to understand and compare than a series like:
Division A: $184 982 Division B: $ 44 689 Division C: $ 67 422 To reduce ambiguity, such data are sometimes represented to the nearest order of magnitude, like:
Revenue (in thousands of dollars):
Division A: 185 Division B: 45 Division C: 67

Unimportance

People who are not experts in metrology or statistics can overestimate the usefulness of significant figures. The topic receives much more emphasis in high-school and undergraduate chemistry texts there's generally not any rigorous way to express the uncertainty using significant figures.
   In computer science and numerical analysis, good practice demands the use of guard digits. This is incompatible with any notion of significant figures. For a discussion, see Acton.
   Good examples of how real scientists express uncertain quantities can be found in the NIST compendium of physical constants. None of the values there conform to any "significant figures" rules.
   Procedures for how to properly represent uncertainty, and the rationale for these procedures, can be found in the references.

Further Information

Get more info on 'Significant Digit'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://significant_figures.totallyexplained.com">Significant figures Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.